| When you add Ashly's Proteane DSP Option Card to your PE-Series
amplifier, you have just simplified system implementation for many
applications in live sound, commercial sound reinforcement and installations.
Best of all, standard Ethernet protocol (auto or manual IP configuring),
a PC and Ashly’s easy to understand and navigate Proteane Software
is used to control everything.
Or, do it wireless! Proteane mobile is a software application enabling
you wireless control of Ashly PE-Series amplifiers and the DSP-1 and DSP-2
Option Cards for the Ashly PE-Series amplifiers.
Ashly Proteane DSP Option Cards use a SHARC 200MHz, 32-bit floating-point
processor and operates from 48 to 96kHz with a 24-bit AD/DA. Both the
XLR and Euroblock versions offer both analog and digital (AES3) inputs
and two additional processed output channels to drive additional amplifier
channels. (One card will control two 2-channel amps!)
Ashly Proteane DSP cards have an extensive DSP library including: a full
set of filter types for graphic, parametric, notch and shelving equalization.
Additionally, there are Bessel, Butterworth and Linkwitz/Riley high and
low pass crossover filters with slopes of up to 48dB/octave. For phase
correction, Ashly has included all pass filters as an option. Additional
processing blocks include: signal delay, compressor/limiter, gate, matrix
mixer, signal generators (sinewave, white and pink noise) and metering.
All DSP functions use a “Click and Hot-Plug” user interface
to place processor blocks in the signal chain. This method allows you
to select a processing block and place it wherever you need it in your
signal chain. The process is seamless and in real time, with no need to
wait for your system to recalculate or recompile its settings.
Remote control of the front panel attenuators, power standby/power down
and recall of up to three presets can be done using the contact closure
terminals.
Installation is quite simple. Or, you can order your Ashly PE amplifier
with the DSP Option Card factory installed!
|
