The Ashly Audio MQX-2310 has e a high-pass filter that
can be used to supplement the frequency response by rolling off low end
response to eliminate subsonic interference like wind noise, floor rumble,
and boomy microphone pops. The MQX-2310's is fixed at 40Hz with an 18dB/octave
switchable from the front panel. A 6dB or 15dB range of filter boost or
cut is selectable from the front panel.
The Ashly MQX equalizers are designed to be significantly quiet without
the need for noise reduction to be built into the equalizer circuit. Double-sided
circuit boards and an extensive ground plane design are used in the filter
sections to improve RFI and electrostatic immunity. Precision Wein-Bridge
filters and carefully designed summing amplifiers combine to provide extremely
accurate response, low noise, negligible distortion, and complete immunity
to magnetic fields. All filters exhibit true constant "Q" response
with no broadening near the "flat" setting. High slew-rate circuitry
throughout the signal path results in clean, quiet, transparent sound.
Ashly's unique "T-Beam" front panel construction eliminates
interconnections between the faders and the filters, resulting in a very
rugged and rigid front panel.
Input and output connections include locking XLR, 1/4" TRS and Euroblock.
Ashly's servo-balanced output circuitry maintains unity gain even if pins
2 or 3 are connected directly to ground. The power supply is a universal
switching power supply which operates from 100-240VAC, 50/60Hz with the
power switch located on the rear panel.