Audio-Technica AT4040 Cardioid Condensor Microphone
“The AT4040 has a smooth character all its own with a clear and open
top end –a perfect complement to any mic collection.” Joe
Chiccarelli, Producer / Engineer
A marriage of technical precision and artistic inspiration, the Audio-Technica
AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability
for greatest versatility. Held to the highest standards of consistency and reliability,
the Audio-Technica AT4040 may be used with confidence in a wide variety of miking
applications, even under the stringent demands of today's modern digital recording
systems. The AT4040’s low-noise circuitry is symmetrical and transformerless,
resulting in exceptional transient response and clean output signals, even under
high-output conditions. The microphone is totally free of the distortion associated
with conventional transformer-coupled outputs. Its fast response to transients
contributes to the open, transparent reproduction of even the most troublesome
of instruments and sound effects.
Audio-Technica AT4040 Features: |
Audio-Technica
AT4040 Includes: |
- Technically-advanced large diaphragm tensioned
specifically to provide smooth, natural sonic characteristics
- Externally polarized (DC bias) true condenser design
- Exceptionally low noise, wide dynamic range and high-SPL capability
for greatest versatility
- Transformerless circuitry virtually eliminates low-frequency distortion
and provides superior correlation of high-speed transients
- Precision-machined, nickel-plated brass, acoustic element baffle provides
enhanced element stability and optimal sensitivity
- Open acoustical environment of the symmetrical housing assembly minimizes
unwanted internal reflections
- State-of-the-art surface-mount electronics ensure compliance with
A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Switchable 80 Hz hi-pass filter and 10 dB pad
|
- 1 x AT8449 Shockmount
- 1 x Dust Cover
- 1 x Protective Carrying Case
|
Listen
to the Audio-Technica AT4040:
- Female
Vocals (5.4Mb, wav)
- Male
Vocals (3.43 Mb, wav)
- Acoustic
Guitar (4.12Mb, wav)
Signal path is as follows: Microphone output to Great
River MP-2NV preamp to Pro Tools HD. iZ RADAR 24 used for A-to-D conversion.
NOTE: These are large files. We recommend "right-clicking",
select "save target as" and save to your desktop. Then play
the files from there.
|
Audio-Technica AT4040 General
Specifications: |
| Element: |
....... |
Externally-polarized (DC bias) condenser |
| Polar Pattern: |
....... |
Cardioid |
| Frequency
Response: |
....... |
20-20,000 Hz |
| Low Frequency
Roll-Off: |
....... |
80 Hz, 12 dB/octave |
| Open Circuit
Sensitivity: |
....... |
-32 dB (25.1 mV) re 1V at 1 Pa |
| Impedance: |
....... |
100 ohms |
| Maximum Input
Sound Level: |
....... |
145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal) |
| Noise: |
....... |
12 dB SPL |
| Dynamic Range
(Typical): |
....... |
133 dB, 1 kHz at Max SPL |
| Dynamic Range: |
....... |
82 dB, 1 kHz at 1 Pa |
| Phantom Power
Requirements: |
....... |
48V DC, 4.2 mA typical |
| Switches: |
....... |
Flat, roll-off;
10 dB pad (nominal) |
| Weight: |
....... |
12.7 oz (360 g) |
| Dimensions: |
....... |
6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter |
| Output Connector: |
....... |
Integral 3-pin XLRM-type |
| Accessories
Furnished: |
....... |
AT8449 shock mount for 5/8"-27 threaded
stands; microphone dust cover; protective carrying case |
| Audio-Technica
Case Style: |
....... |
R1 |
|
