Audio Technica AT4047/SV
Audio-Technica AT4047/SV Cardioid Condensor
Microphone
”The AT4047/SV is one of my favorite and most versatile microphones.
I use it on everything from drums and horns to vocals.” Frank
Filipetti, Grammy-Winning Producer/Engineer
Incorporating a transformer-coupled output and a specially tuned element, the
Audio-Technica AT4047/SV provides the warm sonic characteristics reminiscent
of early F.E.T. studio microphone designs, while utilizing modern design and
manufacturing techniques to ensure consistency and reliability. Exceptionally
wide dynamic range, low self-noise and high SPL capability converge in this
versatile transducer that excels on vocals, strings, acoustic guitar, instrument
ensembles, small vocal groups and voice-overs.
The Audio-Technica AT4047/SV element assembly incorporates dual, gold-vaporized
and aged large diaphragms for extended frequency response. The specially tuned
element improves dynamic range and the ability to handle high SPLs without sacrificing
high-frequency characteristics. Floating construction mounting of the element
provides isolation from noise and vibration.
A classic silver-matte finish adorns both the microphone and the included Audio-Technica
AT8449/SV studio shock mount.
Audio-Technica AT4047/SV
Features: |
Audio-Technica
AT4047/SV Includes: |
- Transformerless circuitry virtually eliminates
low-frequency distortion and provides superior correlation of high-speed
transients.
- Precision-machined, nickel-plated brass, acoustic element baffle provides
enhanced element stability and optimal sensitivity.
- The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step
aging process so that the optimum characteristics achieved remain constant
over years of use.
- Floating-construction capsule assembly provides isolation from noise
and vibration
- Open acoustical environment of the symmetrical housing assembly minimizes
unwanted internal reflections .
- State-of-the-art surface-mount electronics ensure compliance with
A-T's stringent consistency and reliability standards.
- Custom shock mount provides superior isolation.
|
- 1 x AT8449/SV Shockmount
- 1 x Dust Cover
- 1 x Protective Carrying Case
|
Listen
to the Audio-Technica AT4047/SV:
- Female
Vocals (5.4Mb, wav)
- Male
Vocals (3.43 Mb, wav)
- Acoustic
Guitar (4.12Mb, wav)
Signal path is as follows: Microphone output to Great River
MP-2NV preamp to Pro Tools HD. iZ RADAR 24 used for A-to-D conversion.
NOTE: These are large files. We recommend "right-clicking",
select "save target as" and save to your desktop. Then play
the files from there.
|
Audio-Technica AT4047/SV
General Specifications: |
| Element: |
....... |
Externally-polarized (DC bias) condenser |
| Polar Pattern: |
....... |
Cardioid |
| Frequency
Response: |
....... |
20-18,000 Hz |
| Low Frequency
Roll-Off: |
....... |
80 Hz, 12 dB/octave |
| Open Circuit
Sensitivity: |
....... |
-35 dB (17.7 mV) dB re 1V at 1 Pa |
| Impedance: |
....... |
250 ohms |
| Maximum Input
Sound Level: |
....... |
149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal) |
| Noise: |
....... |
9 dB SPL |
| Dynamic Range
(Typical): |
....... |
140 dB, 1 kHz at Max SPL |
| Dynamic Range: |
....... |
85 dB, 1 kHz at 1 Pa |
| Phantom Power
Requirements: |
....... |
48V DC, 3.0 mA typical |
| Switches: |
....... |
Flat, roll-off;
10 dB pad (nominal) |
| Weight: |
....... |
14.5 oz (410 g) |
| Dimensions: |
....... |
6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter |
| Output Connector: |
....... |
Integral 3-pin XLRM-type |
| Accessories
Furnished: |
....... |
AT8449/SV shock mount for 5/8"-27 threaded
stands; microphone dust cover; protective carrying case |
| Audio-Technica
Case Style: |
....... |
R1 |
|
