(Your shopping cart is empty)





Sign up for our Weekly
Email Newsletter
Special offers and Coupons!

Sign Up Now


























You are here:

Home > All Manufacturers > Audio Technica > Wireless Systems > System 10 PRO Digital Wireless

AUDIO-TECHNICA - System 10 PRO Digital Wireless Microphone Systems

Audio Technica System 10 PRO Digital Wireless Mic Systems

  • WHY AUDIO TECHNICA SYSTEM 10 PRO?

    Operating Outside TV Bands
    Are you aware that the FCC is scheduled to hold an incentive auction, expected to start in early 2016, to reclaim additional TV-band spectrum from current license holders? The FCC will then “repack” channels to free contiguous space (a process that may force some broadcasters to move to different channels or go off the air) and finally auction off the freed space to the highest bidder. This process will likely lead to even greater congestion in a spectrum that is already very crowded. One of the reasons we designed System 10 to operate within the 2.4 GHz range was to avoid the congestion and regulatory uncertainty associated with the TV bands. Still, this is hardly a sudden pivot for us. Our innovative SpectraPulse ultra wideband digital wireless system, for example, released in 2007, operates well outside the TV bands in the 6-10 GHz range. And System 10’s immediate predecessors, System 8 and System 9, both operate in the VHF traveling bands. So we’ve been focusing on these solutions for a while.

    Why is 2.4 GHz WiFi Band OK?
    While it is certainly true that there’s a lot of activity within the 2.4 GHz range – WiFi, microwave ovens, etc. – System 10 is a frequency-agile system capable of continually detecting and adjusting its frequency to operate without interference. Both the receiver units and transmitters in System 10 are actually transceivers that are constantly communicating with one another. These transceivers allow System 10 to remain always aware of other 2.4 GHz usage in a given area, automatically changing frequencies to avoid interference.

    3 Levels of Diversity Assurance
    Like all System 10 products, System 10 PRO provides three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. The system is continuously monitoring the spectrum and can change one or both of the frequencies on the fly if interference is encountered. Time Diversity sends the signal in two time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to compensate for the inherently shorter wavelengths of a 2.4 GHz system, thereby maximizing signal integrity.

    Transceivers
    All of the System 10 PRO receiver units and transmitters are actually transceivers – each sends and receives signals – that stay in constant communication with one another. This allows the system to change frequencies whenever needed.

    Easy To Use
    Although the System 10 PRO is a powerful, professional wireless system, the user doesn’t need any kind of technical training to
    operate it. It is ready to go right out of the box. Adding transmitters or receiver units to the system is also very simple and is covered by easy-to-follow instructions in the user manual. System 10 PRO automatically assigns and changes frequencies, so the user doesn’t need to know anything about available frequencies or how to set them. This is also beneficial for someone intending to travel with their system, since they won’t need to worry about where in the U.S. the system will be used – it will work perfectly fine anywhere.

    No Analog Compander
    System 10 PRO offers full-bandwidth, high-fidelity audio. There is no analog companding during transmission and reception.
    System 10 PRO is capable of full-frequency response (20 Hz to 20 kHz), and better-than-CD audio quality of 24-bit/48 kHz.

    Pairing Multiple Transmitters to One Receiver Unit
    System 10 PRO allows users to pair each receiver unit with multiple transmitters (up to 10). This can be useful for guitarists and other musicians who play multiple instruments – they can affix a paired body-pack transmitter to each instrument, then simply turn the transmitters off and on to switch instruments. This feature might also be beneficial for venues, such as houses of worship, where multiple microphones are used in different locations and/or for different applications: even with one receiver unit the user can employ multiple mics simply by turning one paired mic off and turning another one on.

    Plays Well With Existing Systems
    As previously mentioned, the System 10 PRO continually monitors activity in the 2.4 GHz range and automatically adjusts its own frequencies to avoid interference. Thus it works perfectly well, straight from the box, in environments with a WiFi network. It is also ideal for adding additional channels on top of an existing TV-band wireless setup, since System 10 will not cause any intermod or interference issues when used in tandem with TV-band systems. Nor will the existing setup need to be reconfigured, as would be the case if adding additional TV-band wireless.

    Rack Space Efficiency
    System 10 PRO lets you fit up to four channels in a single (19") rack space. Each System 10 PRO dual-channel chassis takes up half a rack space and can be mounted alone using the included mounting brackets and screws. But two chassis can also be fastened together with the joining plate that comes with each system and mounted together into a single rack space, providing very efficient multichannel installation. [Up to 4 x Wireless Mic Receivers in 1RU!]

    Link Function
    Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system. The RJ12 cable runs from the OUT connector of the first chassis to the IN connector of the second chassis, and so on. (The IN connector of the first chassis and the OUT connector of the last chassis in the chain will remain unused.) While multiple System 10 PRO chassis will work together without linking, this is not recommended. Linking creates a much more stable environment in which receiver units work together, with all receiving, transmitting and frequency allocation coordinated to prevent audio dropouts and enable simultaneous use of up to 10 channels.

    Latency
    All digital wireless systems have some latency – it’s unavoidable. The important thing is that the gap between the original audio presentation (e.g., voice or instrument) and the reception and broadcast of that audio be so slight as to be imperceptible. With 3.8 ms of latency, System 10 PRO performs far better than accepted standards.

    ANYWHERE WIRELESS!

    Live Sound (Fixed Installation)
    System 10 PRO offers high-fidelity digital audio from a rock-solid system that’s incredibly easy to set up and operate. This makes it an ideal fit for fixed-installation wireless applications, such as for praise bands and choirs in houses of worship. No special tech knowledge is required to install or use the system.

    House of Worship
    System 10 PRO is easy to install and use. And since each of its receiver units can pair with multiple transmitters, one system will give a church plenty of flexibility. A pastor can use a body-pack transmitter with a lav mic for most of the service, then switch that off and turn on a handheld transmitter when interacting with others, say for taking wedding or baptismal vows. Affordability also makes the System 10 PRO a wise investment for houses of worship.

    Live Sound (Touring)
    Since the System 10 PRO works anywhere in the U.S., automatically selecting the best frequencies wherever you take it, it’s a great choice for touring live-sound applications. Set it up at the new location, turn it on, and you have dependable, high-fidelity digital wireless. Plus, it’s a lightweight system, making it easy to pack up and transport to your next location.

    Boardroom
    System 10 PRO’s remote-mounting feature makes it an ideal choice for boardrooms and other meeting spaces. The chassis can be rack-mounted out of the way in a tech closet with a receiver unit remote-mounted in the boardroom. Additionally, the system’s capacity for operating without interference in WiFi zones makes it a dependable choice for any business environment.

    Rental
    Because of its versatility, ease of operation and ability to work automatically anywhere in the U.S., the System 10 PRO is the perfect unit to stock for rentals. It can be rented with confidence to anyone, anywhere for any wireless application, with no need to rely on an RF specialist.

    Presenter
    Presenters who travel from place to place want a wireless system that’s easy to transport, easy to set up and use (without any training or special tech knowledge), is affordable, and provides dependable, high-fidelity audio. The System 10 PRO satisfies on all accounts. It’s priced to fit the budget of individuals, travels easily from place to place, and can be turned on anywhere in the U.S. and provide interference-free digital wireless. It also provides the option for multiple transmitters, so presenters can easily make use of a separate handheld mic, if desired.

    Education Facility
    Since System 10 PRO has a low cost per channel, installing multiple systems is not cost prohibitive. Additionally, System 10 PRO is easy for everyone to use, so educators won’t need to be trained on the system, but can start using it right away.


Audio Technica ATW-1301 System 10 PRO Digital Wireless System - Unipak Transmitter
Audio Technica ATW-1301 System 10 PRO Digital Wireless System - Unipak Transmitter [No Mic]
Price: $429.00

Audio-Technica’s System 10 PRO ATW-1301 Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 UniPak transmitter, 2.4 GHz. [Mic not included / sold seperately]
Audio Technica ATW-1301-L System 10 PRO Digital Wireless System - Unipak Transmitter Omni Lapel
Audio Technica ATW-1301-L System 10 PRO Digital Wireless System - Unipak Transmitter Omni Lapel
Price: $499.00

Audio-Technica’s System 10 PRO ATW-1301-L Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 UniPak transmitter, 2.4 GHz with MT830cW Omni-Lavalier Microphone.
Audio Technica ATW-1311 System 10 PRO Digital Wireless System - 2 x Unipak Transmitters
Audio Technica ATW-1311 System 10 PRO Digital Wireless System - 2 x Unipak Transmitter [No Mics]
Price: $759.00

Audio-Technica’s System 10 PRO ATW-1311 Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, 2 x ATW-RU13 receiver units and 2 x ATW-T1001 UniPak Transmitters. (Mic Not Included - Sold Seperately)
Audio Technica ATW-1311-L System 10 PRO Digital Wireless System - 2 x Bodypacks with Omni Lapels
Audio Technica ATW-1311-L System 10 PRO Digital Wireless System - 2 x Bodypacks with Omni Lapels
Price: $899.00

Audio-Technica’s System 10 PRO ATW-1311-L Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, 2 x ATW-RU13 receiver units and 2 x ATW-T1001 UniPak Transmitters with 2 x MT830cW Omnidirectional Lapel Mics.
Audio-Technica ATW-1312 : System 10 PRO Digital Wireless System - 1 x Bodypack 1 x Handheld
Audio Technica ATW-1312 System 10 PRO Digital Wireless System - 1 x Bodypack (No Mic) 1 x Handheld Mic
Price: $779.00

Audio-Technica’s System 10 PRO ATW-1312 Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, 2 x ATW-RU13 receiver units and 1 x ATW-T1001 UniPak Transmitter.- (Mic Not Included - Sold Seperately) - and 1 x ATW-T1002 Dynamic Unidirectional handheld Transmitter.
Audio-Technica ATW-1312-L : System 10 PRO Digital Wireless System - 1 x Bodypack with Omni Lapel 1 x Handheld
Audio Technica ATW-1312-L System 10 PRO Digital Wireless System - 1 x Bodypack (Omni Mic) 1 x Handheld Mic
Price: $849.00

Audio-Technica’s System 10 PRO ATW-1312-L Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, 2 x ATW-RU13 receiver units and 1 x ATW-T1001 UniPak Transmitter with MT830cW Omni-Lavalier Microphone and 1 x ATW-T1002 Dynamic Unidirectional handheld Transmitter.
Audio-Technica ATW-1322 : System 10 PRO Digital Wireless System - 2 x Handheld Mics
Audio Technica ATW-1322 System 10 PRO Digital Wireless System - 2 x Handheld Mic
Price: $799.00

Audio-Technica’s System 10 PRO ATW-1312-L Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, 2 x ATW-RU13 receiver units and 2x ATW-T1002 Dynamic Unidirectional handheld Transmitter.
Audio-Technica ATW-1302 : System 10 PRO Digital Wireless System - Handheld Mic
Audio-Technica ATW-1302 : System 10 PRO Digital Wireless System - Handheld Mic
Price: $449.00

Audio-Technica’s System 10 PRO ATW-1301-L Digital Wireless System includes: ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1002 Dynamic Unidirectional handheld Transmitter.