The Aviom remote-controllable 6416m Mic Input Module provides
16 state-of-the-art mic- level analog inputs to a Pro64 system. Each channel
features continuous gain control, +48V phantom power, low cut filter,
phase invert, mute, and a network activation button. With a switchable
pad per channel, the Aviom 6416m also accepts balanced line-level inputs.
Audio settings for each channel of the Aviom 6416m can be configured from the front panel
or controlled remotely using the optional Aviom RCI
Remote Control Interface combined with the Aviom MCS
Mic Control Surface. A single Aviom MCS
can be used to control all Aviom 6416m Mic Input Modules in a Pro64 network
or those assigned to a particular Control Group. Sixteen mic preamp presets
can be saved in each Aviom 6416m.
On the rear panel, the Aviom 6416m features both XLR jacks and DB25 multipin
connectors for inputs and passive splits. A-Net network connections use
heavy-duty locking EtherCon® connectors.
Pro64 A-Net supports three ranges of variable sample rates: 44.1/48kHz±,
96kHz±, and 192kHz±. No matter the sample rate, all 16 input
channels on the Aviom 6416m are available for use. All audio is streamed
at 24-bit resolution with no data compression at any time.
The Aviom 6416m also includes I/O for Aviom's Virtual Data Cables™.
The VDCs can be used for simultaneously distributing up to 14 channels
of non-audio control data to any device on the Pro64 network. The Aviom
6416m provides VDC connectors for MIDI In, MIDI Out, RS232, and GPIO.
The Aviom 6416m also features the security of a rear-panel four-pin XLR
connector for optional backup DC power.
|
