The Aviom AV-P2 Output Module provides up to two channels
of analog outputs from a Pro16 A-Net digital audio stream. The analog
output level for each channel is set with front-panel DIP switches.
Aviom AV-P2 modules can be connected in any combination of serial or
parallel connections, using Pro16 A-Net Distributors. There is no limit
to the number of devices that can be daisy chained, or to the number of
parallel splits in a single system.
Each Aviom AV-P2 receives a 16-channel A-Net stream originating at a
Pro16 input module, console interface card, or Pro64™ audio network
(via the ASI A-Net Systems Interface module).
A front-panel rotary switch allows the output to be set to any one of
those 16 channels. If the selected channel is part of a stereo pair (set
at the input module), the left and right channels are automatically routed
to the left and right outputs on the Aviom AV-P2. If the selected channel
is not part of a stereo pair, the channel’s audio is routed to both
the left and right outputs.
Audio is distributed to the Aviom AV-P2 over standard Cat-5e cables,
using Aviom’s A-Net digital audio protocol. A-Net supports plug-and-play
installation, real-time distribution with sub-millisecond latency, and
long cable runs up to 500ft/150m. Power can be supplied to the Aviom AV-P2
with an external DC power supply or over the Cat-5e cable (with an A-Net
Distributor). Additionally, Pro16 A-Net audio streams can be transmitted
over single- or multi-mode fiber optics using certain standard third-party
media converters.
The Aviom AV-P2 has reversible mounting flanges. Two Aviom AV-P2 modules
can be mounted side by side on a standard 1U rack tray. The AV-P2 is compatible
with all Pro16 Series products.
|
