 |
 |
 |
|
Crest CA2 Amplifier
CREST AUDIO CA2 Professional Power Amplifier
The Crest Audio CA2 professional power amplifier is designed to achieve unsurpassed
sonic performance and long-term reliability — even when operating under
extreme stress — in touring or fixed installation applications. Absolute
sonic accuracy is the hallmark of every Crest amplifier. Bass is solid and defined
to the limits of audibility, with ample current reserves delivered by an “over-engineered”
power supply and advanced Class AB output circuit design. Wide-bandwidth output
devices assure detailed, transparent high frequency response.
The Crest Audio CA2 amplifier is built exclusively in Crest’s own USA
manufacturing facility, with internal components selected for premium quality
and proven durability. Each modular subassembly is pre-tested, and the assembled
Crest Audio CA2 amplifier receives a rigorous “hot room” burn-in
before thorough final checkout on precision test equipment.
CREST
AUDIO CA2 FEATURES: |
|
- Crest’s legendary “overbuilt” power supply
- Toroidal power transformer
- Latest generation of high-speed,
wide-bandwidth output devices
- Twin tunnel cooling with back-to-front air flow
- Dual, variable speed DC fans
- Massive, extruded aluminum heat sinks
- Balanced XLR and 1/4-inch (TRS) inputs
- 5-Way Binding Post Outputs or Speakon™ connectors
(market dependent)
- External switches for stereo/parallel/bridged mono mode,
Pin 2/3 hot (+), ground lift, and gain/input sensitivity
- Recessed, stepped attenuators
- Front panel circuit breaker switch
- Modular construction
- Five-year warranty*
|
TourClass® protection circuits:
- ACL (Active Clip Limiting) prevents speaker damage with gentle
gain reduction at clip threshold.
- IGM (Instantaneous Gain Modulation) monitors speaker loads to
detect conditions that may overstress output devices, allowing safe operation
into nominal 2 Ohm impedances.
- AutoRamp gradually increases gain to attenuator setting level
when amplifier is turned on.
- TourClass also includes comprehensive thermal management, and
short circuit, DC voltage, turn-on/off transient, current inrush and sub/ultrasonic
input protection.
|
CREST
AUDIO CA2 POWER SPECS:
|
|
|
|
|
| |
8 Ohm Stereo |
4 Ohm Stereo |
8 Ohm Bridged |
|
|
1kHz,
0.01% THD+N: |
....... |
160 W |
250 W |
500 W |
|
|
20Hz-20kHz,
0.1% THD+N: |
....... |
150 W |
200 W |
450 W |
|
|
|
CREST
AUDIO CA2 GENERAL SPECS: |
Max
RMS Output Voltage: |
....... |
44 V / Channel |
Peak
Output Voltage: |
....... |
62 V / Channel |
Frequency
Response: |
....... |
20 Hz - 20 kHz, -3dB @ 135 Hz (+0
/ -0.3dB, 1W / 8 Ohm) |
Power
Bandwidth : |
....... |
20 Hz - 20 kHz, -0.9dB /+.15dB
(rated power at 4 ohm, 1% THD+N) |
THD=N: |
....... |
<0.01% (rated power at 4 Ohm,
1kHz) |
SMPTE
IMD: |
....... |
<0.01% (rated power at 8 Ohm,
60Hz & 7kHz) |
Damping
Factor: |
....... |
368:1 (10 - 400Hz at 8 Ohm) |
Input
Sensitivity: |
....... |
0.775V standard |
Voltage
Gain : |
....... |
X45 standard |
Input
Impedance: |
....... |
>20k Ohm Balanced / >10k Ohm
Unbalanced |
| Class: |
....... |
AB |
Input
Connectors: |
....... |
Female XLR (Pin 2+, dealer configurable
for pin 3+), TRS (tip+) |
Output
Connectors: |
....... |
5-way binding posts or Speakon Connectors |
Power
Supply: |
....... |
100V-240V, 50-60Hz |
Idle
Current Draw 120V: |
....... |
1.2A |
1/8
Power Draw: |
....... |
3.25A (typical
music, 120V / 4 Ohm) |
1/3
Power Draw: |
....... |
5.5A (continuous music, 120V / 4
Ohm) |
Max.
Current Draw: |
....... |
9.0A (circuit breaker rating, 120V
/ 4 Ohm) |
Thermal
Emissions: |
....... |
1195 BTU/hr (1/8 power, 4 Ohm) |
| |
1607 BTU/hr (1/3 power, 4 Ohm) |
Cooling: |
....... |
Back to Front via 2 rear panel mounted
variable speed DC fans with removable filters |
Dimensions: |
....... |
3.5" H x 19" W x 18"
D |
Gross
Weight / Net Weight: |
....... |
38 lbs / 33lbs |
Warranty: |
....... |
5 years * |
| Downloads
& Links: |
|
|
Front
/ Rear Panels
|
|
| (883kb, pdf) |
(136kb, pdf) |
See Specifications
|
|
|
|
|
|
|
|
|
|
|
