The Electro-Voice EVID C10.1 loudspeaker system is a complete
low frequency ceiling subwoofer package. The Electro-Voice EVID C10.1
is designed to augment the low frequency response of any Electro-Voice
EVID ceiling speaker. The package consists of a bezel assembly, grille,
rear enclosure, 10-inch loudspeaker and internal line-matching transformer.
The Electro-Voice EVID C10.1 loudspeaker utilizes a 2nd order crossover
network to provide the correct bandpass frequency response for use with
any EVID Ceiling loud speaker. The Electro-Voice EVID C10.1 utilizes a
transformer that offers a selection of 7.5 (70-V only), 15, 30 or 60 watts
delivered to the loudspeaker system using either 70-V or 100-V lines,
or 8 ohm bypass.Selection is via a convenient switch on the front of the
waveguide.
The perforated grille of the Electro-Voice EVID C10.1 is finished in
semi-gloss white powder-coated enamel. The baffle and bezel are constructed
from UL 94V-0 rated ABS. The rear enclosure, with fiberglass damping material,
provides an optimum internal volume for extended low-frequency performance.
A rear cover, with provisions for a junction box fitting, provides access
to a 4-pin terminal block that allows direct connection to the speaker
with 12 gauge wire and provides full-range pass through to additional
speakers. A tile bridge is included for safe suspension of the Electro-Voice
EVID C10.1 ceiling system in a drop ceiling that uses mineral wool, or
other fiber-based ceiling tiles.
The Electro-Voice EVID line of ceiling speakers has been designed to
work together as a complete system in a wide range of different ceiling
constructions. They provide controlled dispersion, high-efficiency, high-maximum
output, ease of installation, and wide-range reproduction of music or
voice.material, provides an optimum internal volume for extended low-frequency
performance.
|
