FURMAN PS-8R FEATURES:

• Power-up in three delayed outlet groups
• Power-down reverses sequence
• Triple-mode varistor spike and surge suppression
• RFI filtering with multi-stage EMI/RFI filter
• Power Status LED's indicate which outlets have power
• Mains Wiring indicators monitor wiring integrity, show Normal and five kinds of faults
• Remote option (model PS-8R) allows turn-on/turn-off at a distance simply by connecting a switch (and LED if desired)
• Multiple units may be daisy-chained using PS-REL relay
• Three unswitched outlets (one front, two rear)
• 15 amp rating with circuit breaker
• Three Year limited warranty

Using the Furman PS-8R is a simple and inexpensive way to apply and remove power in a controlled, repeatable, foolproof 3-step sequence. It is ideal when large installations must be switched by inexperienced personnel.

The Furman PS-8R provides three outlet pairs labeled Delay 1, Delay 2, and Delay 3, that receive power almost immediately, 5 and 10 seconds respectively after the front panel switch is thrown to ON. When thrown to OFF, the sequence is reversed, with Delay 3 losing power almost immediately, Delay 2 after 5 seconds, and Delay 1 after 10 seconds. The delay intervals are preset at these durations, but may be altered by means of an internal trimpot adjustment. In addition to the delayed outlets, a single front panel outlet and a rear panel pair are unswitched. All rear panel outlets are standard 120V, 15A duplex types; isolated ground outlets may be substituted at an additional cost.

The Furman PS-8R offers all basic power conditioning features besides its sequencing capability. It provides varistor spike and surge protection across all three modes, as well as a sophisticated EMI/RFI filter for blocking radio frequency line noise. Clean, filtered power is provided at all 9 outlets, even the unswitched ones.

The Furman PS-8R also assists in analyzing any faults that may occur in the AC mains wiring. Two green and one red neon indicators light in a specific pattern for normal wiring and in different patterns for various faults. When the AC wiring is correct, both green indicators will be lit. If a fault is present, a chart next to the indicators will identify its exact nature.

FURMAN PS-8R GENERAL SPECS: