Williams Sound


Click to verify BBB accreditation and to see a BBB report.



(Your shopping cart is empty)
You are here: Home > All Manufacturers > Meyer Sound > Meyer Sound Industrial Series
Meyer Sound Industrial Series

Meyer Sound Industrial Series

Meyer Sound’s Industrial Series is a line of application-tailored products that provide innovative solutions to specialized sound reinforcement needs or applications in permanent installation and mobile sound. Many of the products pioneer new approaches to sound propagation. And, as with all Meyer Sound products, they provide the best audio quality possible for a particular situation.

All Industrial Series products are self-powered (except the MM-4) and are available with Meyer Sound’s convenient QuickFly rigging and mounting options. RMS remote monitoring system optionally available (except Stella-4, Stella-4C, Stella-8C, MM-4XP and MM-4), and weather-protected versions are available for products relevant to outdoor applications.

Unique Solutions For Tricky Problems.


  MM-10 MM-4 MM-4CEU MM-4XP MM-4XPD
  MPS-481 MPS-488E MPS-488HPe MPS-488HPp MPS-488P
  MVC-5 SB-1 SB-2 SB-3F Stella-188
  Stella-4 Stella-4C Stella-8C    

Meyer Sound MM-10 : Miniature Subwoofer
Meyer Sound MM-10 : Miniature Subwoofer
.

The Meyer Sound MM-10 Miniature Subwoofer features a 10" driver that delivers an impressive maximum peak SPL of 123 dB through an onboard 225 Watt Amplifier.
Meyer Sound MM-4 Miniature Wide-Range Loudspeaker
Meyer Sound MM-4 Miniature Wide-Range Loudspeaker
.

The Meyer Sound MM-4 loudspeaker is a very compact, wide-range loudspeaker for high quality distributed system applications. Features: a single 4-inch cone driver with a 16-ohm voice coil mounted in a sealed enclosure. The MM-4 draws 150 watts peak from the line, and produces 112.5 dB peak SPL. In contrast to conventional low power 70-volt transformer based systems, the MM-4 connects directly to the amplifier and is capable of producing high sound pressure levels while dramatically reducing distortion and easing installation requirements.
MEYER SOUND MM-4CEU : Control Electronics Unit
MEYER SOUND MM-4CEU : Control Electronics Unit
.

The MEYER SOUND MM-4CEU Control Electronics Unit is required when using MM-4 miniature widerange loudspeakers.
Meyer Sound MM-4XP Self Powered Miniature Loudspeaker
Meyer Sound MM-4XP Self Powered Miniature Loudspeaker
.

Meyer Sound MM-4XP Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).
Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker
Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker
.

Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).
Meyer Sound MPS-481 External Power Supply
Meyer Sound MPS-481 External Power Supply
.

Meyer Sound MPS-481 External Power Supply
Meyer Sound MPS-488E 48V Power Supply for up to 8 MM-4XP speakers - Switchcraft EN3 5-pin connectors.
Meyer Sound MPS-488E 48V Power Supply for MM-4XP, with 8 EN3 5-pin female output connectors
.

Meyer Sound MPS-488e external power supply delivers DC power and balanced audio to up to 8 Meyer Sound MM-4XP loudspeakers. Switchcraft EN3 5-pin connectors.
Meyer Sound MPS-488HPe : Power Supply - 48V DC - for up to 8 Meyer Sound UP-4XP, MM-4XP, MM-10XP and HMS-10 speakers - Switchcraft EN3 connectors
Meyer Sound MPS-488HPe : Power Supply - 48V DC - EN3 connectors
.

The Meyer Sound MPS-488HPe external power supply delivers DC power and balanced audio to up to eight Meyer Sound UP-4XP, MM-4XP, MM-10XP and HMS-10 loudspeakers that require an external 48 V DC power supply.
Meyer Sound MPS-488HPp : Power Supply - 48V DC - Phoenix connectors
Meyer Sound MPS-488HPp : Power Supply - 48V DC - Phoenix connectors
.

The Meyer Sound MPS-488HPp external power supply delivers DC power and balanced audio to up to eight Meyer Sound loudspeakers that require an external 48 V DC power supply.
Meyer Sound MPS-488P 48V Power Supply for up to 8 MM-4XP speakers - Phoenix 5-pin connectors
Meyer Sound MPS-488P 48V Power Supply for MM-4XP, with 8 Phoenix 5-pin male output connectors
.

Meyer Sound MPS-488p external power supply delivers DC power and balanced audio to up to 8 Meyer Sound MM-4XP loudspeakers. Phoenix 5-pin connectors.
Meyer Sound MVC-5 Graduated Vertical Coverage Powered Loudspeaker
Meyer Sound MVC-5 Graduated Vertical Coverage Powered Loudspeaker
.

The Meyer Sound MVC-5 graduated vertical coverage loudspeaker is a self-powered, multiple-driver, curvilinear array with fixed splay angles, housed in a single compact enclosure. The system is ideally suited for voice reproduction in large spaces with single-level listening areas, where vertical control in the key intelligibility bands is required.
Meyer Sound SB-1 Parabolic Long-Throw Sound Beam
Meyer Sound SB-1 Parabolic Long-Throw Sound Beam
.

The Meyer Sound SB-1 Parabolic Sound Beam is the first device that propagates sound waves that decrease as little as 3 dB SPL per doubling of distance for more than 300 ft, across a five-octave frequency range, with a consistent and narrow beam width.
Meyer Sound SB-2 Parabolic Wide-Range Sound Beam
Meyer Sound SB-2 Parabolic Wide-Range Sound Beam
.

The Meyer Sound SB-2 is a biamplified sound reinforcement loudspeaker housed in a parabolic dish enclosure. Capable of high sound pressure levels with precisely defined narrow coverage, the Meyer Sound SB-2 offers a unique solution for large-scale distributed paging and music systems.
Meyer Sound SB-3F Sound Field Synthesis Loudspeaker
Meyer Sound SB-3F Sound Field Synthesis Loudspeaker
.

The Meyer Sound SB-3F sound field synthesis loudspeaker is a high powered, long-throw device capable of projecting mid-high frequency energy over distances of up to 1 km. The SB-3F achieves a narrow coverage angle by employing sound field synthesis technology with multiple small point sources to achieve a coherent sound field.
Meyer Sound Stella-188 Power Supply (18V - DC)
Meyer Sound Stella-188 Power Supply (18V - DC)
.

The Meyer Sound Stella-188 external power supply is required when using Stella-4, Stella-4C, and Stella-8C installation loudspeakers. The self-powered Meyer Sound Stella loudspeakers are designed primarily for use in Meyer Sound's Constellation installs.
Meyer Sound Stella-4 Self Powered Installation Loudspeaker
Meyer Sound Stella-4 Self Powered Installation Loudspeaker
.

Meyer Sound Stella-4 Self Powered Installation Loudspeaker features a single 4-inch cone transducer capable of producing a maximum peak SPL of 108 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
Meyer Sound Stella-4C Self Powered Installation Loudspeaker
Meyer Sound Stella-4C Self Powered Installation Loudspeaker - Ceiling Mount
.

Meyer Sound Stella-4C Self Powered Installation Loudspeaker - Ceiling Mount - features a single 4-inch cone transducer capable of producing a maximum peak SPL of 108 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
Meyer Sound Stella-8C Self Powered Installation Loudspeaker
Meyer Sound Stella-8C Self Powered Installation Loudspeaker - Ceiling Mount
.

Meyer Sound Stella-8C Self Powered Installation Loudspeaker - Ceiling Mount - features a single 8-inch coaxial LF driver with a 0.75" Tweeter capable of producing a maximum peak SPL of 117 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
ProAVmax.com
PO Box 3209
Camp Verde, AZ
(866) 460-2569

 About Us
 Shipping & Returns
 Privacy Policy
 Contact Us
 Help