 |
 |
 |
 |
MEYER SOUND CQ-1: CONCERT SERIES WIDE COVERAGE
LOUDSPEAKER:
The Meyer Sound CQ-1 wide coverage main is a self-powered, phase-corrected
reinforcement loudspeaker offering precise, low-Q coverage. The Meyer Sound
CQ-1 features a patented constant-Q horn design — the result of extensive
research using Meyer Sound’s calibrated anechoic chamber. The frequency
response of 40 Hz to 16 kHz is uniform over the entire coverage area in both
the horizontal and vertical axes, with no side lobes even when measured at a
one-sixth octave frequency resolution.
MEYER SOUND CQ-1 : FEATURES |
MEYER SOUND
CQ-1 : APPLICATIONS |
- Extremely smooth horizontal pattern for consistent
sound
- Ultra-low distortion and flat response yield
remarkable fidelity
- Extended low-frequency response for stand-alone
applications
- Self-contained control electronics, amplifiers,
and drivers
- Dual-Channel 1240 Watt Amplifier (620 Watts /
Channel)
- Active balanced input circuit
- Active crossover with optimized pole-zero filter
combinations
- Intelligent AC System
- TruPower Limiting (TPL)
|
- Concert halls, theatres and houses of worship
- Downfill and delays in large-scale reinforcement
- Stage monitoring side fill
- Paging and announcing
- Cinema and 5.1 applications
|
The Meyer Sound CQ-1 loudspeaker’s unique combination
of precise pattern control, compact size, low distortion and high power
make it suitable for a wide variety of installed and rental applications.
The Meyer Sound CQ-1 is perfect as the main PA in small- to mid-sized
auditoriums, houses of worship, clubs and hotel ballroom settings, and
is highly effective in delayed fill applications for arenas and outdoor
concert systems. The Meyer Sound CQ-1 loudspeaker’s low-frequency
section comprises a single 15-inch Meyer Sound cone driver, and the high-frequency
section utilizes a 4-inch diaphragm compression driver coupled to an 80-degree
by 40-degree constant-Q horn.
The sophisticated Meyer Sound MP-2/CQ-1 power amplifier is integrated
into an accessible, lightweight rear module. The amplification, processing
and protection circuitry produces consistent and predictable results in
any system design. The proprietary two-channel amplifier employs Meyer
Sound’s proven class AB/H design with complementary MOSFET output
stages, and delivers 1240 watts burst power (620 watts per channel). Audio
is processed through an electronic crossover and correction filters for
phase and frequency response, as well as driver protection circuitry.
Each amplifier channel of the Meyer Sound CQ-1 has TruPower® limiting
technology which maximizes loudspeaker reliability, minimizing power compression
and extending component life. TruPower also affords higher continuous
SPL capability at all frequencies with maximum headroom and regulates
voice coil temperature. Limiter activity is easy to monitor with the limit
LEDs on the rear panel.
The Meyer Sound MP-2/CQ-1 amplifier’s power supply incorporates
Meyer Sound’s Intelligent AC™ system, which performs automatic
voltage selection, EMI filtering, soft current turn-on and surge suppression.
Intelligent AC allows fail-safe operation worldwide, with no need to manually
select the AC mains voltage. The compact Meyer Sound CQ-1 system is housed
in an all-birch multi-ply enclosure with a textured, hard shell black
finish. It is flyable and arrayable using standard ring and stud pan fittings
on top and bottom rated at 500 lbs (226.80 kg) with a 5:1 safety factor.
An optional mounting yoke allows flexible, quick installation and easy
aiming in theatrical and permanent applications.
Options for the CQ-1 cabinet include weather protection and finishes
in custom colors for fixed installations and other situations requiring
specific cosmetics. The Meyer Sound CQ-1 integrates with the optional
RMS™ remote monitoring system, which displays signal and power levels,
driver status, limiter activity, and amplifier temperature on a remote
Windows® computer. |
|
MEYER SOUND CQ-1 : GENERAL
SPECS: |
Frequency
Range : |
...... |
35 Hz - 18 kHz |
Frequency
Response: Free Field: |
...... |
40 Hz - 16 kHz +/- 4dB |
Maximum
Peak SPL: |
...... |
136 dB @ 1 Meter |
Coverage
Horizontal : |
...... |
80 degrees Horizontal x 40 degrees Vertical |
Transducers:
Low Frequencies: |
...... |
1 x 15" Cone Driver |
High
Frequencies: |
...... |
1 x 1.5" exit, 4" diaphragm compression
driver |
| Amplifier Power: |
...... |
1,240 Watts (620 Watts / Channel) |
| Automatic Voltage Selection: |
...... |
85 V AC - 134 V AC; 165 V AC - 264 V AC |
| Audio Connector: |
...... |
Female XLR input with male XLR loop output or
VEAM |
| AC Connector: |
...... |
Nema L6-20, IEC-309 or VEAM |
| Dimensions: |
|
21.00" w x 30.00" h x 22.00"
d (533 mm x 762 mm x 564 mm) |
| Weight: |
...... |
130 lbs (58.97 kg) |
| Quick Fly Options: |
...... |
MYA-CQ : Mounting Yoke Assemble (Call for Price)
MCB-CQ : Caster Board (Call for Price) |
Downloads
& Links: |
|
|
|
(890kb, pdf) |
(195kb, pdf)
|
|
|
|
 |
 |
|
 |
 |
 |
 |
 |
Model |
|
Description |
|
H
x V |
Watts |
LF |
HF |
|
|
|
: |
Wide Coverage Main Loudspeaker |
80 x 40 |
1,240 |
15 |
4" |
|
|
: |
Narrrow Coverage Main Loudspeaker |
50 x 40 |
1,240 |
15" |
4" |
|
|
: |
Dedicated Downfill Loudspeaker |
50 x 50 |
1,240 |
15" |
4" |
|
|
: |
Horn Loaded Mid-Bass Loudspeaker |
120 x 120 |
1,240 |
2 x 12" |
-- |
|
|
: |
Horn-Loaded Long-Throw Loudspeaker |
40 x 35 |
1,240 |
12" |
4" |
|
|
: |
Horn-Loaded High-Q Main Loudspeaker |
30 x 25 |
2,480 |
2 x 12" |
3 x 4" |
|
|
: |
Flyable Subwoofer |
360 x 180 |
1,240 |
2 x 15" |
-- |
|
PSW-6
|
: |
High-Power Cardioid Subwoofer |
--
-- |
2,480
-- |
2 x 18"
4 x 15" |
--
-- |
|
|
: |
Ultra Compact Subwoofer |
-- |
2,250 |
2 x 15" |
-- |
|
|
: |
Compact High-Power Subwoofer |
360 x 180 |
1,240 |
2 x 18" |
-- |
|
|
: |
UltraHigh-Power Subwoofer |
-- |
2,250 |
2 x 18" |
-- |
|
NOTE: Meyer Sound does not allow
any pricing over the phone or to be displayed online. We are proud to
be an Authorized Meyer Sound Dealer and are here to assist you with your
project. To receive pricing on Meyer Sound products for your project please
submit your Quote Request today. And
if you'd like to discuss your project please call us at (866) 460-2569.
Thank you. |
|
|
 |
 |
 |
 |
|
 |

|