|
|
|
|
|
|
Meyer Sound MM-10 : Miniature Subwoofer
|
|
|
The Meyer Sound MM-10 Miniature Subwoofer features a 10" driver with 2" Voice Coil that delivers an impressive maximum peak SPL of 123 dB through an on-board 220W Continuous / 440W Peak Output Amplifier.
|
|
|
|
|
|
|
|
|
|
Meyer Sound MM-4 Miniature Wide-Range Loudspeaker
|
|
|
The Meyer Sound MM-4 loudspeaker is a very compact, wide-range loudspeaker for high quality distributed system applications. Features: a single 4-inch cone driver with a 16-ohm voice coil mounted in a sealed enclosure. The MM-4 draws 150 watts peak from the line, and produces 112.5 dB peak SPL. In contrast to conventional low power 70-volt transformer based systems, the MM-4 connects directly to the amplifier and is capable of producing high sound pressure levels while dramatically reducing distortion and easing installation requirements.
|
|
|
|
|
|
|
|
|
|
MEYER SOUND MM-4CEU : Control Electronics Unit
|
|
|
The MEYER SOUND MM-4CEU Control Electronics Unit is required when using MM-4 miniature widerange loudspeakers.
|
|
|
|
|
|
|
|
|
|
Meyer Sound MM-4XP Self Powered Miniature Loudspeaker
|
|
|
Meyer Sound MM-4XP Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).
|
|
|
|
|
|
|
|
|
|
Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker
|
|
|
Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).
|
|
|
|
|
|
|
|
|
|
Meyer Sound MPS-481 External Power Supply
|
|
|
Meyer Sound MPS-481 External Power Supply
|
|
|
|
|
|
|
|
|
|
Meyer Sound MPS-488HPe : Power Supply - 48V DC - EN3 connectors
|
|
|
The Meyer Sound MPS-488HPe external power supply delivers DC power and balanced audio to up to eight Meyer Sound UP-4XP, MM-4XP, MM-10XP and HMS-10 loudspeakers that require an external 48 V DC power supply.
|
|
|
|
|
|
|
|
|
|
Meyer Sound MPS-488HPp : Power Supply - 48V DC - Phoenix connectors
|
|
|
The Meyer Sound MPS-488HPp external power supply delivers DC power and balanced audio to up to eight Meyer Sound loudspeakers that require an external 48 V DC power supply.
|
|
|
|
|
|
|
|
|
|
Meyer Sound MVC-5 Graduated Vertical Coverage Powered Loudspeaker
|
|
|
The Meyer Sound MVC-5 graduated vertical coverage loudspeaker is a self-powered, multiple-driver, curvilinear array with fixed splay angles, housed in a single compact enclosure. The system is ideally suited for voice reproduction in large spaces with single-level listening areas, where vertical control in the key intelligibility bands is required.
|
|
|
|
|
|
|
|
|
|
Meyer Sound SB-1 Parabolic Long-Throw Sound Beam
|
|
|
The Meyer Sound SB-1 Parabolic Sound Beam is the first device that propagates sound waves that decrease as little as 3 dB SPL per doubling of distance for more than 300 ft, across a five-octave frequency range, with a consistent and narrow beam width.
|
|
|
|
|
|
|
|
|
|
Meyer Sound SB-2 Parabolic Wide-Range Sound Beam
|
|
|
The Meyer Sound SB-2 is a biamplified sound reinforcement loudspeaker housed in a parabolic dish enclosure. Capable of high sound pressure levels with precisely defined narrow coverage, the Meyer Sound SB-2 offers a unique solution for large-scale distributed paging and music systems.
|
|
|
|
|
|
|
|
|
|
Meyer Sound SB-3F Sound Field Synthesis Loudspeaker
|
|
|
The Meyer Sound SB-3F sound field synthesis loudspeaker is a high powered, long-throw device capable of projecting mid-high frequency energy over distances of up to 1 km. The SB-3F achieves a narrow coverage angle by employing sound field synthesis technology with multiple small point sources to achieve a coherent sound field.
|
|
|
|
|
|
|
|
|
|
Meyer Sound Stella-188 Power Supply (18V - DC)
|
|
|
The Meyer Sound Stella-188 external power supply is required when using Stella-4, Stella-4C, and Stella-8C installation loudspeakers. The self-powered Meyer Sound Stella loudspeakers are designed primarily for use in Meyer Sound's Constellation installs.
|
|
|
|
|
|
|
|
|
|
Meyer Sound Stella-4 Self Powered Installation Loudspeaker
|
|
|
Meyer Sound Stella-4 Self Powered Installation Loudspeaker features a single 4-inch cone transducer capable of producing a maximum peak SPL of 108 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
|
|
|
|
|
|
|
|
|
|
Meyer Sound Stella-4C Self Powered Installation Loudspeaker - Ceiling Mount
|
|
|
Meyer Sound Stella-4C Self Powered Installation Loudspeaker - Ceiling Mount - features a single 4-inch cone transducer capable of producing a maximum peak SPL of 108 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
|
|
|
|
|
|
|
|
|
|
Meyer Sound Stella-8C Self Powered Installation Loudspeaker - Ceiling Mount
|
|
|
Meyer Sound Stella-8C Self Powered Installation Loudspeaker - Ceiling Mount - features a single 8-inch coaxial LF driver with a 0.75" Tweeter capable of producing a maximum peak SPL of 117 dB at one meter over a wide frequency range of 100 Hz to 22 kHz.
|
|
|
|
