MEYER SOUND M1D-SUB: UltraCompact Subwoofer

MEYER SOUND M1D-SUB : FEATURES

MEYER SOUND M1D-SUB: APPLICATIONS

• Extremely compact and lightweight
• High power-to-size ratio for maximum installation flexibility
• Exceptional fidelity and peak capability assure clean, high-impact lows
• QuickFly rigging system simplifies integration in flown or ground-stacked arrays

• Theatrical sound reinforcement
• Houses of worship
• Portable and installed audio-visual systems
• Surround playback systems
• Seamless integration with M1D loudspeakers

Meyer Sound M1D-Sub contains two robust 10-inch cone drivers, each featuring a 2-inch voice coil and a lightweight neodymium magnet structure. Power rating per driver is 400 AES watts*. A fully integrated and self-powered system, the Meyer Sound M1D-Sub also incorporates a two-channel class AB/bridged complementary MOSFET amplifier with 450 watts total burst capability. An Intelligent AC power supply selects the correct operating voltage in the range of 90 to 264 V AC at 50 or 60 Hz, allowing international use without manually setting voltage switches. The Intelligent AC supply also performs protective functions to compensate for hostile conditions on the AC mains. These functions protect both the loudspeaker and electronics from erratic AC conditions and increase the lifespan of the loudspeaker. An ultra-low-noise fan is fitted, but cooling is primarily provided by a massive external extruded aluminum heat sink.

The Meyer Sound M1D-Sub features Meyer Sound’s QuickFly rigging system with rugged, reliable and deceptively simple components. All load stresses are transmitted through the rigging frames and associated hardware, not through the wooden cabinets. The optional QuickFly MG-1D multipurpose grid allows either flying or ground stacking various combinations of Meyer Sound M1D and Meyer Sound M1D-Sub. Up to 16 M1Ds (or the equivalent weight of M1D and M1D-Sub) with a 7:1 safety factor may be flown, or up to 8 M1Ds or 4 M1D-Subs may be ground stacked. For flying only, the simpler optional MTG-1D will support up to 16 M1Ds (or the equivalent weight of M1D and M1D-Sub) with a 7:1 safety factor.

The Meyer Sound M1D-Sub includes Meyer Sound’s RMS monitoring system as standard. RMS allows the full range of operating parameters to be monitored in real time, remotely over a network using a Windows computer.