MEYER SOUND SB-1 : FEATURES

MEYER SOUND SB-1 : APPLICATIONS

• Clean high-frequency fill with high SPL at distances greater than 300 ft
• Consistent 10° beamwidth at 100 ft affords ultra-precise coverage control
• Extraordinary throw capability enables point-source reinforcement without delay loudspeakers
• Articulated mounting yoke provides for precise, adjustable aiming

• Far-field stadium and arena high-frequency coverage
• Large-scale event music reinforcement
  
  

The Meyer Sound SB-1 comprises a fiberglass parabolic reflector dish with a bullet-shaped pod containing a 4-inch compression driver and an aspherical horn, mounted at the focus of the parabolic surface and aimed at the center of the dish. A 12-inch band-limited cone driver is embedded inside the center of the dish facing the pod to steer and focus the sound produced from the horn. Mounted in a companion yoke, the dish housing serves as the parabolic aiming mechanism and contains the amplification, signal processing, and control electronics for both drivers. The high-frequency pod can be disassembled and packed for shipping inside the dish.

The Meyer Sound SB-1’s integrated electronics and amplifier system utilizes the Intelligent AC power supply and the TruPower limiting system. The Intelligent AC supply auto-selects the correct operating voltage (facilitating international use), suppresses high voltage transients, provides soft-start power-up (eliminating high inrush current), and sustains operation during low-voltage periods. TPL protects the driver components from damage due to overdriving and assures maximum peak output while minimizing power compression. The Meyer Sound SB-1 is RMS remote monitoring system compatible.

Meyer Sound Industrial Series

MM-4XP