The Meyer Sound USM-100P offers coverage of 100-degrees
horizontal and 40-degrees vertical, permitting broad coverage in both
stage monitoring and flown applications (using the integral L-Track hardware).
The constant-Q design of the high-frequency horn provides uniform beamwidth
across the entire operating range in both the horizontal and vertical
planes. Attenuation outside the beamwidth is rapid and uniform at all
frequencies, with minimal side lobing.
Each driver is individually powered by a dedicated channel of the proprietary
class AB/bridged amplifier with complementary MOSFET output stages. Total
power is 550 watts. The incoming audio signal is processed through an
electronic crossover and correction filters for flat phase and frequency
response as well as for driver protection. Phase-corrected electronics
ensure flat acoustical amplitude and phase response, resulting in exceptional
impulse response and precise imaging.
Field-replaceable audio input modules accommodate a range of applications.
The standard version offers looping XLR input and output connectors, while
an enhanced looping version adds polarity switching (the looping output
is not affected) and input attenuation (0 dB to -18 dB). A summing mono
version with two inputs is also available. The amplifier/processing package
incorporates Meyer Sound’s Intelligent AC™ system, which performs
automatic voltage selection, EMI filtering, soft current turn-on and surge
suppression, and allows fail-safe operation worldwide.
The Meyer Sound USM-100P cabinet is constructed from premium birch plywood
and covered in a black textured hard-shell finish. Recessed handles allow
easy transit, a hex-stamped steel grille protects the speakers, and a
grey foam grille covering is included. The enclosure can be custom painted
for applications requiring specific cosmetics. Meyer Sound USM-P monitors
can be deployed as stage wedges or flown as sidefill or choir monitors.
Two L-Track strips on the top panel that work with the cabinet’s
center of gravity facilitate angle adjustment. A bottom strip serves as
an anchor point for tilt angles. Rigging is for single cabinet suspension
only.
The Meyer Sound USM-100P is compatible with the RMS™ remote monitoring
system, which offers comprehensive monitoring of system parameters on
a Windows®-based network. |
