RDL D-TPP6A : Audio Sender - Dual RCA - with Video Pass-Through - RCA/BNC

The D-TPP6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation with Video pass-through via BNC or RCA. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The D-TPP6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.

The D-TPP6A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.

RDL D-TPP6A - FEATURES / ADVANTAGES:

• Video Pass-Through with RCA Jack on Front Panel
• Video Pass-Through with RCA and BNC Jack on Rear Panel
• Available in RDL White/Gray (D-TPP6A)
• Available in Stainless Steel (DS-TPP6A)

RDL D-TPP6A - INCLUDES:

• (1 ) RDL D-TPP6A Format-A Audio Sender with Composite Video Pass-Through
• Operating instructions