TOA Electronics IP-300D Amplifier
TOA IP-300D Amplifier
TOA's versatile IP Series Dual Channel Power Amplifiers offer high quality
sound output that is ideally suited for such professional audio system applications
as halls, hotel ballrooms and sports stadiums. Specially designed for compact
proportions and lighter weight, these pro-use amplifiers feature proven power
amplification circuitry that ensures outstanding reliability.When connected
to a 4 ohm load, the ruggedly constructed IP-600D
delivers 600W of sound output per channel (IP-450D:
450W, IP-300D: 300W). Stereo, Parallel or Bridged operation can be selected
by way of a rear panel-mounted mode selection switch.
Slimly designed for easy installation in standard 19” equipment racks,
these 2-unit-high amplifiers feature rugged steel chassis construction and a
solid black finish. Their attractive black zinc diecast front panels feature
a large, centrally positioned power switch surrounded by recessable input level
control knobs. Designed to prevent accidental setting changes, these knobs must
first be pressed to raise them above the front panel surface for input level
adjustment. LED indicators provide instantly recognizable readout of operating
conditions such as signal presence, clipping, protection circuit activation
and level control bypass.
Quiet, ballbearing-loaded, variable-speed fans ensure efficient cooling. Removable
front panel dust filters simplify maintenance. Front panel-mounted carrying
handles can be easily detached when installed in door-equipped racks. Optional
output transformers are available for high impedance applications.
The TOA IP Series Amplifiers are backed with a five year warranty.
| FEATURES: |
|
- Clean, Reliable, Affordable Power you can depend on.
- Compact, Lightweight Design.
- Remarkably Quiet Operation, extremely low noise floor.
- Stereo, Bridged, and Parallel Output Modes - switch-selectable with
independent adjustment of each channel in Parallel mode.
- Optional Constant Voltage Transformers available for commercial distributed
speaker systems.
- Electronically Balanced Screw-Terminal and ¼" TRS Phone
Jack Input Connectors.
- Optional Input Transformer Available - model LT-101.
- Large Dual Screw-Terminal Barrier Strip accepts two sets of #10 AWG
speaker cable conductors for each output channel.
- High Quality "Alps" Brand Stepped Attenuators for precise
gain adjustments, recessable to prevent accidental setting changes.
|
- Attenuator Security Covers Included to provide an additional level
of security.
- Signal Presence, Peak, Protect, and Attenuator Bypass LED's for instantly
recognizable status indication.
- Temperature-controlled, Variable-speed Fan for efficient cooling.
- Removable Front Panel Dust Filters simplify maintenance.
- Advanced Protection Circuitry monitors voltage, current and thermal
levels and disables output to minimize potential damage from overloads,
short circuit, DC offset or over heating.
- In-rush Current Limiter prevents AC breaker overload during system
turn-on of multiple amplifiers.
- Front Rack-Mount Brackets and Rear Rack Supports.
- Detachable Front Handles for mounting in door-equipped racks.
- Two Rack Units to conserve rack space.
- Five Year Warranty.
|
| TOA IP-300D General Specs: |
Power
Requirements: |
....... |
115V, +/-10%, 50/60Hz |
Power
Consumption:: |
....... |
430 VA (Based on UL/CSA Standards)
1200 VA (1040 W) (rated output 4ohms + 4 ohms) |
Input: |
....... |
2 Circuits 10kW (electronically-balanced)
+2.2 dB (1V ) ±0.5 dB (input level control in maximum position)
Balanced phone jack, screw-terminal barrier strip |
Output: |
....... |
Stereo: 300W + 300W (4 Ohm), 200W + 200W (8 Ohm)
Bridged: 600W (8 Ohm)
Screw Terminal (M4) Solderless terminal of 5.5-4 or 5.5 -5 usable or #10
AWG bare wire. |
Frequency
Response: |
....... |
20Hz - 20kHz (+0dB-0.5dB) |
THD: |
....... |
0.01% (8 Ohm, 1kHz), 0.1% (8 Ohm, 20Hz - 20kHz) |
Intermodulation
Distortion: |
....... |
0.3% @ 8 Ohm (60Hz: 7kHz @ 4:1 ratio) |
Voltage
Gain : |
....... |
32 dB |
Protection
Circuit: |
....... |
Protection against excessive current flow due to overload,
short circuit (under 0.5 Ohm), unusual DC voltage output, and heat sink
temperature rise over 230°F (110°C) |
Dynamic
Range: |
....... |
108dB @ 26dB gain, 103dB @ 32dB gain (20Hz- 20kHz) |
Cooling
System: |
....... |
Forced air cooling under 104°F (40°C): Stop 104°-167°F
(40°-75°C): Low to high speed (variable)
over 167°F (75°C): High speed |
Dimensions |
....... |
19" W x 18 5/8" D x 4" H w/ feet, 3 3/8"
w/o feet |
Weight: |
....... |
28.6 lbs (13 kg) |
Accessories: |
....... |
1 x Power Cord, 2 x Rubber Attenuator Covers |
| Downloads
& Links: |
|
|
|
|
|
| (200kb, pdf) |
(75kb, pdf) |
(542k, pdf) |
(75k, pdf) |
|
|
