The Turbosound TXD-081 is a compact trapezoidal full range 2-way loudspeaker
with an 8" low frequency driver and a 1" high frequency driver on
a Converging Elliptical Waveguide™ in an easily transportable trapezoidal
enclosure. Includes two stage high frequency protection system to guard against
HF driver overload. Constructed from birch plywood, fitted with flush handles,
pole mount socket and rubber feet, internal M10 rigging points and two Speakon
NL4MP connectors.
The Turbosound TXD-081 is a compact trapezoidal passive
two-way loudspeaker enclosure designed for use in mobile speech and music
sound reinforcement applications as well as in a wide range of fixed installations.
It consists of an 8” reflex-loaded low frequency driver and a 1”
high frequency compression driver on a 100°H x 60°V dispersion
HF horn in an optimally tuned trapezoidal enclosure. These high grade
components are matched with an internal passive crossover to ensure a
seamless transition between the HF and LF drivers.
CROSSOVER & HF PROTECTION:
The crossover of the Turbosound TXD-081 incorporates a two-stage thermal
overload protection system which prevents damage to the high frequency
driver, reacting instantly to large transient peaks while still allowing
wide dynamic range to be maintained. Although the protection system is
transparent at normal operating levels, as the level increases the signal
is gradually and imperceptibly compressed once the critical threshold
has
been reached.
CONSTRUCTION:
The Turbosound TXD-081 cabinet is constructed from 12mm (1/2”) birch
plywood, screwed and glued together for maximum rigidity. A pole mount
socket is fitted for use with optional 35mm poles and loudspeaker stands.
A recessed flush handle is provided at the rear of the cabinet for easy
lifting and carrying. A grey powdercoated perforated steel mesh grille
protects the drive units from damage.
RIGGING:
Rigging points are provided on the top and rear of the cabinet to enable
the Turbosound TXD-081 to be suspended and angled in permanent installations
using shoulder eyebolts. The enclosure is also fitted with internal rigging
points for use with Turbosound and Omnimount™ wall and ceiling brackets.
Two Neutrik Speakon NL4MP speaker connectors are located on the rear panel,
providing input and parallel connections to additional Turbosund TXD series
cabinets or bass enclosures. |
|
TURBOSOUND TXD-081: GENERAL
SPECS: |
Dimensions: |
...... |
415mm x 307mm x 270mm (16.3”
x 12.1” x 10.6”) |
Net
Weight : |
...... |
11.3 kg (24.9 lbs) |
Components: |
...... |
1 x 8” (203mm) LF driver, 1 x 1”
(25mm) HF driver on a Converging Elliptical Waveguide™ |
| Frequency Response: |
...... |
70 Hz - 20kHz +/- 4dB |
Nominal
Dispersion: |
...... |
100 deg H x 60 deg V @ -6 dB points |
| Power Handling: |
...... |
200 watts r.m.s., 400 watts program
Recommended amplifier power 400 watts @ 8 ohms |
Sensitivity: |
...... |
93 dB @ 1 Meter |
Maximum
SPL : |
...... |
116 dB Continuous, 122 dB Peak |
| Nominal Impedance: |
...... |
8 Ohms |
| Crossover: |
...... |
Internal passive network at 3kHz; 12dB/octave
high-pass, 12dB/octave low-pass |
| Construction: |
...... |
12mm (1/2”) birch plywood; rebated, screwed
and glued. Finished in TurboBlue™ semi-matt textured paint (optional
black textured paint). One recessed carrying handle. Integral pole mount
socket |
| Grille: |
|
Heavy Duty powder coated perforated steel mesh |
| Connectors: |
...... |
(2) Neutrik Speakon NL4MP, wired pin1+: positive,
pin 1-: negative, pins 2+ and 2- N/C |
| Flying Hardware: |
...... |
(3) M10 internal threaded rigging points
(4) M6 internal threaded rigging points for OmniMount™ brackets
(4) M8 internal rigging points for WB-20 and CB-55 brackets |
| Spares & Accessories: |
...... |
LS-8010 8” (203mm) LF loudspeaker
CD-111 1” (25mm) HF compression driver
RD-111 Replacement diaphragm for CD-111
MG-081 Replacement grille
WB-20 Wall bracket
CB-55 Ceiling bracket
PB-55 Wall bracket, pole mount fixing |
