Turbosound TXD-15M: 15" TWO-WAY BIAMP/PASSIVE FLOOR MONITOR
TURBOSOUND TXD-15M: 15" TWO-WAY BIAMP/PASSIVE
FLOOR MONITOR
The Turbosound TXD-15M is a Biamp/Passive 2-way floor monitor with a 15"
low frequency driver and a 1.4" high frequency compression driver on a
40H x 60V high frequency horn in a symmetrical, low profile enclosure. Includes
two stage high frequency protection system to guard against HF driver overload.
Constructed from birch plywood, fitted with flush handles, pole mount socket,
rubber feet and two Speakon NL4MP connectors and a Speakon NL4MD switchable
connector for bi-amp use.
TURBOSOUND TXD-15M: FEATURES |
TURBOSOUND
TXD-15M: APPLICATIONS |
- Bi-amp / Passive
- Symmetrical shape
- HF protection
- Pole mount socket
|
- Wedge Monitoring
- Live sound
- Drum Fill
- Front of House
|
The Turbosound TXD-15M consists of a 15” reflex-loaded
low frequency driver and a 1.4” high frequency compression driver
on a 40°H x 60°V dispersion HF horn in an optimally tuned enclosure.
These high grade components are matched with an internal third order passive
crossover network to ensure a seamless transition between the HF and LF
drivers.
CROSSOVER:
The Turbosund TXD-15M can be used either in passive mode with a single
amplifier channel, or biamped using two channels of a stereo amplifier
and a Turbosound LMS-D4 controller.
The Turbosund TXD-15M passive crossover network incorporates a two-stage
thermal overload protection system which prevents damage to the high frequency
driver, reacting instantly to large transient peaks while still allowing
wide dynamic range to be maintained. Although the protection system is
transparent at normal operating levels, as the level increases the signal
is gradually and imperceptibly reduced once the critical threshold has
been reached.
CONSTRUCTION:
The Turbosound TXD-15M cabinet is constructed from 15mm (5/8”) birch
plywood, screwed and glued together for maximum rigidity. Its symmetrical
shape allows the monitor to be inverted and used as left/right mirror
image pairs.
RIGGING:
In addition to its primary function as a floor monitor, the Turbosound
TXD-12M is also suitable for front-of-house applications and can be used
with the integral pole mount socket on top of optional 35mm poles and
loudspeaker stands. Two recessed flush handles are provided for easy lifting
and carrying, and eight rubber feet are fitted. A grey powdercoated perforated
steel mesh grille protects the drive units from damage.
A Neutrik Speakon NL4MP speaker connector is located at each end of the
cabinet on recessed panels, providing input and parallel connections to
additional TXD series monitors. |
|
TURBOSOUND TXD-15M: GENERAL
SPECS: |
Dimensions: |
...... |
652mm x 547mm x 363mm (25.7”
x 21.5” x 14.3”) |
Net
Weight : |
...... |
30kg (66 lbs) |
Components: |
...... |
1 x 15” (381mm) LF driver, 1 x 3”
voice coil HF compression driver |
| Frequency Response: |
...... |
65Hz - 18kHz +/- 4dB |
Nominal
Dispersion: |
...... |
40°H x 60°V @ -6dB points |
| Power Handling: |
...... |
Passive: 300 watts r.m.s., 600 watts program
Recommended amplifier power 600 watts @ 8 ohms
Bi-amp: LF 300 watts r.m.s., 600 watts program @ 8 ohms;
HF 100 watts r.m.s., 200 watts program @ 16 ohms |
Sensitivity: |
...... |
99 dB @ 1 Meter |
Maximum
SPL : |
...... |
124 dB Continuous, 130 dB Peak |
| Nominal Impedance: |
...... |
8 ohms |
| Crossover: |
...... |
Internal passive network at 1.3kHz; 12dB/octave
high-pass, 12dB/octave low-pass |
| Construction: |
...... |
15mm (5/8”) birch plywood enclosure. Finished
in TurboBlue™ semi-matt textured paint
(optional black). Two recessed carrying handles. Integral pole mount socket |
| Grille: |
|
Heavy Duty powder coated perforated steel mesh |
| Connectors: |
...... |
(2) Neutrik Speakon NL4MP, wired pin1+: positive,
pin 1-: negative, pins 2+ and 2- N/C
(1) Neutrik Speakon NL4MD-V-S, wired pin1+: LF positive, pin1-: LF negative,
pin2+: HF
positive, pin2-: HF negative |
| Spares & Accessories: |
...... |
LS-1521 15” (381mm) LF loudspeaker
RC-1521 Recone kit for LS-1521
CD-212 3” diaphragm compression driver
RD-212 Replacement diaphragm for CD-212
MG-15M/X Metal grille
PX-15M/X Passive crossover network |
Downloads
& Links: |
|
|
|
(286kb, pdf) |
|
|
|
