YAMAHA REV100: DIGITAL REVERBERATION UNIT WITH 99 PROGRAMS

Studio-quality Effects Anywhere You Need Them..... The Yamaha REV100 can be added to a recording system in a multitude of ways to meet individual signal-processing requirements. Since the Yamaha REV100 is so affordable there's no reason why you can't use several at points where its outstanding processing power is most needed.

The "normal" way to use a signal-processor with a mixing console is patched into the aux send/effect return loop. But if you want to use the effects only on a specific instrument it might be more convenient to patch a Yamaha REV100 in-line between the instrument and mixer inputs. You could also patch into the insert I/O jacks of one or two channels if you want to apply the effects directly to low-level microphone signals or returns from a recorder. You might also want to have a Yamaha REV100 between the mixer direct or group outputs and your multitrack or master recorder, using the Yamaha REV100's balance control to achieve the required effect mix.

YAMAHA REV100: FEATURES

99 Editable Presets Exceptionally Easy Programming: Just select one of its 99 top-quality preset effects and you're ready to go. The three most critical parameters for all effect programs are adjustable via rotary panel controls. When you create a sound, press the Store button to register it in the REV100 memory.
True Stereo Reverb: The Yamaha REV100 actually has stereo inputs and outputs.
Superior Sound Quality: 16-bit A/C and D/A converters and a 44.1 kHz sampling rate. The result is full 20 Hz to 20 kHz frequency response with exceptionally low noise and distortion.
Advanced MIDI Features: You can select effect programs via MIDI rather than the panel controls. You can also use MIDI control change commands to actually change effect parameters.
Compact "1U" rack mount dimensions.
Easy-to-read 2 digit LED display
Peak LEDS: The LEDs make it easy to set the optimum level.


YAMAHA REV100: GENERAL SPECS:
Frequency Response:	......	20Hz - 20kHz
Dynamic Range:	......	80 dB Typical
Distortion:	......	Less than 0.1% (1 kHz, max. level)
Input / Number of Channels:	......	2 (phone jacks)
Input / Nominal Level:	......	-10dB
Input Impedance:	.......	20 k ohm (Stereo), 10 k ohm (L-Mono)
Output / Number of Channels:	......	2 (Phone Jack)
Output / Nominal Level:	......	-10dB
Output Impedance:	......	20 k ohm (Stereo), 10 k ohm (L-Mono)
AD Conversion:	......	16 bit
DA Conversion:	......	16 bit
Sampling Frequency:	......	44.1 kHz
Program Memories	......	99
Front Panel Switches:	......	Arrow Up, Arrow Down, MIDI, Store, Power
Front Panel Rotary Controls:	.......	Input Level, Mix Balance, Delay, Decay, Level
Front Panel Display:	.......	7-segment LED x 2 Peak, LR Delay, Decay, Level
Rear Panel Jacks:	.......	Input L (Mono), R Output L (Mono), R
Rear Panel DIN:	......	Midi In
AC Adapter:	......	DC 12V
Dimensions (WxHxD):	......	480 x 45 x 232 mm (18.9" x 1.8" x 9.1")
Weight	......	2.5kg (5.5 lb)