The FSR HD-HAUD-SP-Rx receiver is a true HDBaseT 5-Play device that receives HD Video (up to 4k at 30Hz), Audio De-Embedded 1/8 mini or Phoenix Connection, Bi-directional control (IR & RS-232), Ethernet, 100BaseT Ethernet (2 Ports) and Bi-Directional PoH via 1 CAT-6A shielded cable up to 100 Meters.

The HD-HAUD-SP-Rx works with any of FSR’s 100 Meter HDBaseT transmitters (Required - Sold Seperately) and can be powered from either end (Tx to Rx or Rx to Tx).

FSR HD-HAUD-SP-RX General Specifications:

• 100 Meter units are Class B HDBaseT units
• De-embedded Audio via 1/8 mini jack or Phoenix Connector
• Receives uncompressed full HD Digital HDMI Video, Audio, Control (Bi-Directional IR & RS-232), 100BaseT Ethernet (2 Ports), and Bi-Directional PoH.
• Straight-through cables with RJ-45 connectors wired in TIA/EIA T568B scheme. For best resolution and ESD performance, use shielded CAT6A cable.
• Resolutions: 4k 2160p (3840x2160) / 1080P / 1080i / 720P / 576P / 480P / 576i / 480i
• Receiver is powered via 12V 2A DC power supply (included) which allows 2-way powering. You can power a 100m set from the Transmitter or the Receiver (TX-RX or RX-TX).
• All 100 meter units use Standard PoH (802.11af) compliant power scheme within the HDBaseT Architecture (TX-RX or RX-TX)
• All 100 meter units use the same power supply which allows any of the 100 meter transmitters to be used with any of the 100 meter receivers. Power supply included with all receivers).
• Dimensions: (WxLxH) : 9.13" x 3.67" x 0.71"

FSR HD-HAUD-SP-RX Includes:

• 1 x HD-HAUD-SP-Rx Receiver
• 1 x 2-pin screw down terminal
• 1 x 3-Pin screw down terminal
• 1 x IR Emitter

• 1 x IR Receiver (30kHz - 50kHz)
• 2 x Under Table Mounting Brackets
• 1 x 12VDC 2A Power Supply
• 1 x User's Manual