Lectrosonics Duet Digital IEM/IFB System

The Lectrosonics Duet digital IEM wireless monitor and IFB system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage.

The new Lectrosonics Duet system consists of the M2T dual-stereo half-rack transmitter and M2R diversity belt pack receiver. The Duet covers the UHF frequencies of 470-608 MHz (138 MHz) in a single range, uses digital modulation for transmission, and can accept analog or Dante™ digital inputs. The new system can be considered a "wireless IEM" or a deluxe IFB product, designed and developed with professional touring, installation, theater,filmmaking and broadcast customers in mind.

Both the M2T ½ rack transmitter, and the M2R beltpack receiver units have 2-way IR sync, so scan data from the receiver can be sent to the transmitter and thus onto the Ethernet network for use by Wireless Designer™ software for frequency planning and coordination purposes. Additionally, the system includes a Flex List mode, where a number of names and frequencies can be stored in the receiver. This way, a monitor engineer or production manager can quickly find and listen to any of the talents' mixes on the stage or in the studio.

The compact nature of the M2T ½-rack transmitter means that up to four dual-channel carriers can be sent from 1RU, resulting in either 4 stereo audio feeds or up to 8 mono audio feeds. The tremendous power and flexibility of this system makes it possible to use the Duet for a variety of professional audio applications.

Lectrosonics Duet Features:

M2R Receiver:

• IEM (Wireless Monitor) receiver with digital RF
• 24-bit digital audio
• IR (infrared) port for fast setup
• High resolution, color LCD
• Stereo or mono operation
• Low latency of 1.4 ms with analog inputs

M2T Transmitter:

• IEM (Wireless Monitor) with digital RF transmission
• 24-bit digital audio
• 2 independent stereo audio transmissions per 1/2 RU enclosure
• USB port for firmware updates
• Fully Dante™ compatible
• IR (infrared) port for fast setup
• Up to 50 mW per Rf carrier
• All metal housing
• Compatible with Wireless Designer™ Software

Lectrosonics Duet Includes:

• (qty 1) M2T : Digital IEM/IFB Transmitter with Power Supply, Antennas
• (qty 2) M2R : Digital IEM/IFB Receiver with Clip (Stereo or Mono Operation)

Notes: [Not Included - Sold Seperately.]
1) Order the RMPM2T-1 Single Rack Hardware kit for single M2T Transmitter
2) Order the FMAKM2T Front Mount Antenna Kit for each M2T Transmitter.