MEYER SOUND MM-10 : Miniature Subwoofer
The Meyer Sound MM-10 miniature subwoofer delivers expanded low-frequency
headroom for applications that require excellent audio quality from a
compact cabinet. Designed primarily as a companion to Meyer Sound's MM-4XPD
and UP-4XP compact loudspeakers, the Meyer Sound MM-10 allows system designers to
create full-range systems where space limitations are a concern.
MEYER SOUND MM-10 FEATURES:
- Powerful low-frequency response from a very small
- Low distortion (THD, IM, TIM <0.02%) affords
exceptionally clean bass
- Adaptable to complement MM-4XP, MM-4XPD and UP-4XP
- Versions include 48V DC external power supply
built-in or AC power for driving satellite loudspeakers
MEYER SOUND MM-10 APPLICATIONS:
- Background Music Systems
- Small Theatres
- Portable AV Systems
- Compact Voice Reinforcement Systems
The Meyer Sound MM-10 features an operating frequency
range of 40 Hz to 200 Hz with a conservatively rated maximum peak SPL
of 123 dB. The Meyer Sound MM-10 bass reflex cabinet houses a single 10-inch
driver and single- channel power amplifier complete with onboard processing,
including a crossover, driver protection, and frequency and phase correction.
The built-in crossover accepts full-range signals, facilitating basic
daisy-chaining for signal distribution, eliminating the need for external
crossovers in small setups.
The Meyer Sound MM-10 subwoofer is available in three models,
each offering a different configuration of audio and power connectors.
(See "alternate view" images (above) for rear panel configurations)
- MM-10AC - includes internal power supply, female
XLR audio input / male XLR audio loop out, input polarity switch and
- MM-10ACX-[P/E] - Fitted with either a 5-pin Phoenix
connector or 5-pin EN3 connector for
connecting up to two MM-4XP's
or a single UP-4XP speaker. Includes internal power supply, female XLR audio inputs, PowerCon
connectors, input polarity switch and input gain adjustment.
- MM-10XP-[P/E] - Fitted with either a 5-pin Phoenix
connector or 5-pin EN3 Connector (Requires
48V MPS-488HPe, MPS-488HPp or MPS-481 external power supply). Includes input polarity switch.
The Meyer Sound MM-10XP model includes either a 5-pin Phoenix connector
or sealed 5-pin EN3 connector (ideal for outdoor use) for receiving balanced
audio and DC power. Meyer Sound's MM-10XP amplifier and signal- processing
circuits are designed to store DC power and tolerate voltage drops, thereby
accommodating light-gauge cables and lengthy cable runs.
Meyer Sound MM-10XP loudspeaker systems require an MPS-488HPe, MPS-488HPp
or MPS-481 external power supply. The rack mount multi-channel power supply can deliver
both balanced audio and 48 V of DC power to MM-10XP subwoofers at cable
lengths of up to 150 feet, with just 1 dB of loss in peak SPL using 18
AWG wire. The use of composite multiconductor cables (such as Belden®
1502) allows a single cable to carry both audio and DC power to the MM-10XPs.
Longer cable lengths are possible for moderate applications that don't
drive the loudspeakers to maximum output, or when using heavier wire gauges
for the DC power.
The Meyer Sound MM-10AC and Meyer Sound MM-10ACX subwoofer models include
internal power supplies, female XLR audio inputs, and locking PowerCon
connectors for AC input and looping output (for powering additional units).
The Meyer Sound MM-10AC also includes a male XLR looping output for daisy-chaining
The MM-10ACX offers additional power supply capacity, along with additional
audio and power connectors, for driving a pair of MM-4XPs - effectively
placing the MM-10ACX at the heart of an extremely capable and compact
2.1 loudspeaker system.
Other options for the Meyer Sound MM-10 models include weather protection
and custom color finishes for installations and applications with specific