 |
 |
 |
 |
Nexo PS10U-R2 : 10 Inch High
Power Full Range 2-Way Speaker
The new Nexo PS10U-R2 Loudspeaker can be safely driven with up to 1250
Watts of amplifier power, yet it is only half the weight and volume of
common trapezoidal systems. The dispersion, architecture and weight balance
of the Nexo PS10U-R2 are designed to provide both exceptional PA and stage
monitor performance from a single product without compromise.
Available in two versions - Specify at time of order placement.
[L] - Horn Loaded on Left in monitor position
[R] - Horn Loaded on Right in monitor position
Options:
Color: Black or White
|
Nexo PS10U-R2
Features:
|
- Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of
Worship, etc. High-quality stage monitoring for cabarets A/V, theatre,
broadcast, etc.
- Fill-in system for use with larger NEXO PS/Alpha systems, or any
application needing exceptional side, down and near-field augmentation.
|
Nexo PS10U-R2
Applications: |
- Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of
Worship, etc. High-quality stage monitoring for cabarets A/V, theatre,
broadcast, etc.
- Fill-in system for use with larger NEXO PS/Alpha systems, or any
application needing exceptional side, down and near-field augmentation.
|
This flexibility is realized by a proprietary
constant directivity asymmetrical dispersion horn, easily rotated in four
positions by the user. Coupled with the horn’s unique progressive
horizontal (50° to 100°) and vertical (55°) dispersion, the
most suitable pattern can be selected for vertical or horizontal PA usage
or wedge monitoring. The 2-way passive 8 Ohm design uses a single amplifier
channel to deliver bi-amped performance for less money, space and complexity.
|
Nexo PS10U-R2 General Specs:
Components: |
..... |
LF: 1 x 10"
(25cm) Shielded Neodymium 8 Ohm driver.
HF 1 x 1" throat driver + Low Distortion Constant Directivity Asymmetrical
Dispersion Horn.
|
Height
x Width x Depth: |
..... |
515mm x 316mm x 277 mm (20.28"
x 12.44" x 10.91"). |
Weight: |
..... |
14 kg (31 lbs). |
Connectors: |
..... |
2 x NL4MP SPEAKON 4 pole |
Construction: |
..... |
Baltic Birch Ply finished
with textured black coating
|
Fittings: |
..... |
2 Metal recessed pockets.
|
Front Finish: |
..... |
Moulded Dark Grey Metal
Grill. |
Flying Points: |
..... |
One plate connecting with
external accessories. |
Stand Fittings: |
..... |
Built-in Stand Fitting,
(35mm / 1 3/8") |
Systems
Specs with PS10 TDController: |
Frequency Response: |
..... |
69 Hz - 20 kHz +/- 3dB |
Usable Range @ -6dB: |
..... |
58 Hz - 21 kHz |
Sensitivity 1W/1m: |
..... |
99 dB SPL Nominal; 97 dB
SPL Wideband |
Nominal Peak SPL: |
..... |
129 to 132 dB Peak |
HF Dispersion: |
..... |
Horizontal: 50 degree to 100 degree
Vertical: 55 degree
Rotatable Horn - 4 positions
|
Directivity: |
..... |
Q: 16 Nominal
DI: 12 dB Nominal
(f > 3.0 kHz) |
Crossover: |
..... |
2 kHz - Passive |
Nominal Impedance: |
..... |
8 Ohm |
Recommended Amp: |
..... |
500 W to 1,250 W / 8 Ohms |
System
Operations: |
Electronic Controller: |
..... |
The PS10 TDController is
precisely matched to the PS10U-R2 & LS600 cabinets and includes sophisticated
protection systems. Using PS10-R2 & LS600 without a properly connected
PS8TD will result in poor sound quality and can damage the components.
|
Dispersion Config: |
..... |
After dismounting the front
grille from its fixings, the HF Horn can be rotated in 4 positions for
dispersion configuration. |
Sub-bass: |
..... |
The PS10U-R2 can be used
without optional LS600 Sub-bass. Active two way operation with the LS600
is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2,
additional LS600 may be used for enhanced LF capability. |
Speaker Cables: |
..... |
PS10U-R2 are wired 2- &
2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons
are present on both. Single identical cables can thus be used to loop
through combinations of up to 2 x PS10U-R2 & 1 x LS600 in no particular
order. |
Shipping
and Ordering Specifications: |
Packaging: |
..... |
PS10U-R2 is packaged as
a simgle product. |
Shipping Wght/Vol: |
..... |
17.3 kg (38 lbs) / 0.169
cubic metres. |
Accessories: |
..... |
A full selection of mounting
accessories is available.(Sold Seperately) |
Nexo PS10U-R2 Downloads and
Links:
|
|
 |
 |
 |
 |
|
 |

Accessories for this product... |
|
|

|