The Meyer Sound 1100-LFC low-frequency control element is a self-powered loudspeaker defined by its sonic linearity in reproducing low-frequency transients at high, continuous levels with very low distortion.......

The Meyer Sound 500-HP is a self powered compact high-power subwoofer with 2 x 12" drivers driven by a two-channel (900 Watts / Channel) class AB/H amplifier with complementary MOSFET output stages.

The Meyer Sound 900-LFC compact low-frequency control element is a self-powered loudspeaker defined by its sonic linearity in reproducing low-frequency transients at high, continuous levels with very low distortion.......

The Meyer Sound HD-1 is a self-contained, ultra-precise loudspeaker for near-field sound monitoring in tracking and mixing.

The Meyer Sound JM-1P’s precise high-frequency section is driven by a 4-inch diaphragm compression driver, complemented by a 15-inch, long-excursion cone transducer for the low-mid section. Power is supplied by a dual-channel class AB/H amplifier with 2250 W of peak output, while onboard processing includes electronic crossover, comprehensive driver protection, and correction filters for flat frequency and phase responses.

The LEOPARD compact linear line array loudspeaker is a member of Meyer Sound’s award-winning LEO® Family of loudspeakers, designed to reproduce audio faithfully with tremendous power, superior intelligibility, and extremely low distortion. Like its bigger siblings LEO-M™ and LYON™, LEOPARD delivers the advantages of self-powered design, linear response, and precise directional control.

The Meyer Sound MINA is just over a foot and a half long and weighs only 47 lbs yet MINA is capable of producing up to 128 dB SPL over its wide 100-degree horizontal coverage area.

Meyer Sound MJF-210 High Power Low Profile Stage Monitor is a 3-Channel Class D self-powered phase-corrected stage monitor (50H x 70V degree) (55Hz - 18kHz)

Meyer Sound MJF-212A High Power Stage Monitor is a self-powered, 1250 Watt, 2-way, phase corrected stage monitor offering precise, constant-Q coverage - 50H x 50V degree.

The Meyer Sound MM-10 Miniature Subwoofer features a 10" driver with 2" Voice Coil that delivers an impressive maximum peak SPL of 123 dB through an on-board 220W Continuous / 440W Peak Output Amplifier.

Meyer Sound MM-4XP Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).

Meyer Sound MM-4XPD Directional Miniature Self Powered Loudspeaker delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion (220 Watts).

The Meyer Sound SB-2 is a biamplified sound reinforcement loudspeaker housed in a parabolic dish enclosure. Capable of high sound pressure levels with precisely defined narrow coverage, the Meyer Sound SB-2 offers a unique solution for large-scale distributed paging and music systems.

The Meyer Sound SB-3F sound field synthesis loudspeaker is a high powered, long-throw device capable of projecting mid-high frequency energy over distances of up to 1 km. The SB-3F achieves a narrow coverage angle by employing sound field synthesis technology with multiple small point sources to achieve a coherent sound field.

The Meyer Sound ULTRA-X40 is a self powered speaker with 2 x 8" Low Frequency driver, 1 x 3-Inch Hi Frequency Compression on a 110H x 50V  Rotatable Horn boasting a class D amplifier with 1,950 Watts of power that has a linear peak SPL of 132.5 dB with 18 dB crest factor (M-noise).

The Meyer Sound ULTRA-X42 is a self powered speaker with 2 x 8" Low Frequency driver, 1 x 3-Inch Hi Frequency Compression on a 70H x 50V  Rotatable Horn boasting a class D amplifier with 1,950 Watts of power that has a linear peak SPL of 134 dB with 18.5 dB crest factor (M-noise).

Meyer Sound UMS-1P Ultra-Compact Subwoofer is a self-powered, 450 watt, ultra-compact subwoofer.

Meyer Sound UMS-1XP Ultra-Compact Subwoofer is a self-powered, 450 watt, ultra-compact subwoofer.

The Meyer Sound UP-4XP ultracompact loudspeaker is ideally suited for applications requiring a small, inconspicuous cabinet that also delivers high sound pressure levels, low distortion, and uniform directional control. Features: 2 x 4" LF, 1" HF, Dispersion - 100H x 100V, Three Channel amp with a total of 350 Watts.

Meyer Sound UPJ-1P Compact VariO Loudspeaker is a self-powered, 300 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPJ-1XP Compact VariO Loudspeaker with IntelligentDC Technology is a self-powered, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPJunior Ultra-Compact VariO Loudspeaker is a self-powered, 300 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPJunior-XP Ultra-Compact VariO Loudspeaker is a self-powered, 300 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPM-1P Ultra-Compact Wide Coverage Loudspeaker is a self-powered, 350 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPM-1XP Ultra-Compact Wide Coverage Loudspeaker is a self-powered, 350 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPM-2P Ultra-Compact Narrow Coverage Loudspeaker is a self-powered, 350 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

Meyer Sound UPM-2XP Ultra-Compact Narrow Coverage Loudspeaker is a self-powered, 350 Watt, 2-way, phase corrected reinforcement loudspeaker offering precise, constant-Q coverage.

The Meyer Sound UPQ-1P is a self powered 2-way speaker with 1 x 15" Low Frequency driver, 1 x 100H x 60V Hi Frequency Constant-Q Horn boasting a class AB/H amplifier with 1275 Watts of power.

The Meyer Sound UPQ-2P is a self powered 2-way speaker with 1 x 15" Low Frequency driver, 1 x 60H x 60V Hi Frequency Constant-Q Horn boasting a class AB/H amplifier with 1275 Watts of power.

The Meyer Sound X-800 high-power studio subwoofer is designed primarily to provide additional low-frequency headroom in applications requiring very high monitoring levels coupled with extreme low-frequency transients. Features: Dual 18" Drivers with An integral two-channel class AB/H amplifier with complementary MOSFET output stages supplies a total peak output of 1240 watts (620W/chnl). Each amplifier channel features TruPower limiting technology to maximize loudspeaker reliability, minimize power compression and extend component life.

The LS400 Sub-Bass extends the usable range of the PS8 Loudspeaker to 40Hz, providing high performance and high power output (131dB Peak) in an extremely compact, light weight package. The NEXO-designed shielded 12in Neodymium driver allows the LS400 to be used in close proximity to magnetically sensitive video equipment.

The Nexo LS600-SUB is a high power system capable of producing 138 dB Peak SPL, the new Nexo LS600 Sub-Bass extends the usable range of the PS10-R2 Loudspeaker to 38Hz, providing exceptional performance and high power output in an extremely compact, light weight package.

The NEXO P10 is a 2-Way Passive Point Source Loudspeaker that features an 10 inch Coaxial LF and 1.7 inch diaphragm HF drivers. Modular directivity from the Standard 100x100 horn to the 100x60 in a few seconds.

The NEXO P12 is a 2-Way Passive Point Source Loudspeaker that features an 12 inch Coaxial LF and 3 inch diaphragm HF drivers. Modular directivity from the Standard 60x60 horn to the rotating 90x40 or Assymetric ("PS Like") pattern in a few seconds.

The NEXO P8 is a 2-Way Passive Point Source Loudspeaker that features an 8 inch Coaxial LF and 1.5 inch diaphragm HF drivers. Modular directivity from the Standard 100x100 horn to the 100x60 in a few seconds.

The new Nexo PS10U-R2 Loudspeaker can be safely driven with up to 1250 Watts of amplifier power, yet it is only half the weight and volume of common trapezoidal systems. The dispersion, architecture and weight balance of the Nexo PS10U-R2 are designed to provide both exceptional PA and stage monitor performance from a single product without compromise.

The new Nexo PS15U-R2 is a high power system capable of producing 136dB Peak SPL, the new Nexo PS15U-R2 Loudspeaker can be safely driven with up to 2000 Watts of amplifier power. Controlled by the new, dedicated PS15 TDController-R2, or the NXAMP Powered Controller, the Nexo PS15U-R2 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems.

The PS8U Loudspeaker features advanced NEXO designed low magnetic emission Neodymium drivers, making the PS8 extremely light and compact while usable next to magnetically-sensitive professional video or computer equipment. The dispersion, architecture and weight balance of the PS8U Loudspeaker are designed to provide exceptional PA/stage monitor performance from a single product without compromise.

Portable, yet capable of producing an astonishing 131 dB SPL, the compact, functional design of the Yamaha DXR10 makes it ideal for a wide range of applications. Whether providing simple vocal/instrument amplification, very powerful floor monitoring or comprising a compact SR systemï¾—the Yamaha DXR10 delivers without compromising sound quality and power.

The Yamaha DXR12 is an extremely high-power loudspeaker that is capable of producing a maximum SPL of 132dB with its impressive 1100W of power. It is the perfect solution for live sound applications that demand wide bandwidth and extremely high-resolution sound.

The Yamaha DXR15 achieves class-leading SPLs and full bandwidth performance by combining a powerful Class-D amplifier with a high-power woofer and Yamaha's cutting edge technologies. Throw in some D-CONTOUR and you'll feel like you're using a subwoofer.

The most compact of the Yamaha DXR Series speakers, the Yamaha DXR8 makes the most of its 1100W of power, delivering extremely high output while maintaining outstanding resolution. Adding a DXS12 subwoofer gives you an ultra-compact high-power SR system.

The new Yamaha DXS 18 achieves best in class SPL of up to 136dB and delivers the lowest frequency 32Hz in the lineup. Equipped with a band-pass type enclosure and high power handling 4-inch voice coil magnet that drives the 18-inch woofer, the Class-D amplifier delivers 1020W of power with exceptional clarity and accuracy.

The Yamaha HS5 is a 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter.

The Yamaha HS7 is a 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter.

The Yamaha HS8 is a 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter.

The Yamaha HS8S is a 8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz.

Yamaha SR112V 2-Way, 12 Inch LF with 2 Inch HF, Passive, 350 Watts, 90 x 40 coverage, Carpet Covered, Pole Mount

Yamaha SR115V 2-Way, 15 Inch LF with 2 Inch HF, Passive, 500 Watts, 90 x 40 coverage, Carpet Covered, Pole Mount

Yamaha SR215V 2-Way, 2 x 15 Inch LF with 2 Inch HF, Passive, 1000 Watts, 90 x 40 coverage, Carpet Covered

Yamaha SM10V 2-Way, 10 Inch LF with 1 Inch HF, Passive, 250 Watts, 90 x 90 coverage, Carpet Covered, Pole Mount, Floor Monitor

Yamaha SM12V 2-Way, 12 Inch LF with 2 Inch HF, Passive, 350 Watts, 40 x 90 coverage, Carpet Covered, Pole Mount, Floor Monitor

Yamaha SM15V 2-Way, 15 Inch LF with 2 Inch HF, Passive,  500 Watts, 40 x 90 coverage, Carpet Covered, Pole Mount, Floor Monitor

Yamaha SW115V Passive, 15 Inch Subwoofer, 500 Watts, Carpet Covered, Pole Socket

Yamaha SW118V Passive, 18 Inch Subwoofer, 600 Watts, Carpet Covered, Pole Socket

Yamaha SW218V Passive Subwoofer, 2 x 18 Inch Drivers, 1200 Watts, Carpet Covered