The Yamaha RO8-D is a Dante-compatible Output rack, featuring 8 analog
outputs - 1RU.
Long Distance Dante Network Capability - Low-latency,
low-jitter audio can be transferred over distances up to 100 meters* between
devices via standard Ethernet cables using the Dante network protocol.
The RO8-D can be used as a general-purpose Input box for the Dante network.
Supported sampling rates are 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz.
(* Depending on the type of cable used)
Direct Audio In/Out with a Connected Computer - Connecting
the RO8-D with a standard Ethernet cable to a computer that has a Dante
Virtual Soundcard installed enables you to directly input or output audio
signals without using an audio interface device.
About DANTE - The RO8-D features Dante technology as
a protocol to transmit audio signals. Dante is a network protocol developed
by Audinate (link). It is designed to deliver multi-channel audio signals
at various sampling and bit rates, as well as device control signals over
Ethernet (GbE) network. Dante also offers the following
- Dante transmits up to 512 in/512 out, for a total 1024 channels (in
theory) of audio over a GbE network. (The Rio3224-D features 32 in/24
out with a 24/32-bit resolution. The Rio1608-D features 16 in/8 out
with a 24/32-bit resolution.)
- Dante-enabled devices will automatically configure their network interfaces
and find each other on the network. You can label Dante devices and
their audio channels with names that make sense to you.
- Dante uses high accuracy network synchronization standards to achieve
sample-accurate playback with extremely low latency and jitter. Four
types of latency are available on the Rio: 0.25 msec, 0.5 msec, 1.0
msec, and 5.0 msec. • Dante supports redundant connections via
primary and secondary networks to defend against unforeseen difficulties.
- Connecting a computer to Dante network over Ethernet
enables you to directly input or output audio signals
without using any audio interface devices.
By taking advantages of these benefits, you can skip any
complicated procedures to automate connections and
setups of Dante-enabled devices, remotely control I/O
racks or amplifiers from a mixing console, or make
multi-track recordings to a DAW, such as Nuendo, installed
on a computer in the network.